The most advanced pre-cut adhesive sticker on the market for right handed silverback airsoft SRS.
One sheet contains:
- sticker for whole SRS rifle
- 4x butt plate
- 2x magazine
- 1x DTSS .308/.338
Used material:
Industrial grade multi-purpose polymeric film for hard-to-stick surfaces
The sticker is a 90 microns satin white, high-tensile, PVC film, with aggressive, permanent pressure-sensitive adhesive. Designed to adhere to “hard-to-stick” surfaces, it offers a special adhesive system that is designed to adhere to difficult substrates and low surface energy plastics, especially ABS-plastic. This product is also rated up to 7 years* (unprinted) for outdoor durability. Printed durability is dependent on the ink system used.
Property | Test Methods | Typical Value |
Surface Finish | Gloss Meter 60° Reflection | 40 to 60 Gloss Units |
Application Temperature Range | On clean, dry substrate | -1°C to 27°C optimum |
Service Temperature Range | On clean, dry substrate | -54°C to 107°C |
Peel Adhesion | PSTC-1, 15 min, 21°C | 0.89 kg/cm |
Option 1: Kryptek Mandrake
Option 2: Treelike Gunskin
You can find them also here:
https://www.skirmshop.nl/en/pcu-srs-kryptek-mandrake-gunskin.html
https://www.skirmshop.nl/en/srs-treelike-gunskin.html
Do not forget use discount code “PCU5” for 5%